These are generally not noticeable and they do not affect the parts function or strength. Due to the FDM 3D printing process, layer lines will be visible and small imperfections. 1x Alcohol wipe (for adhesive preparation)Īs with all our 3D printed parts, please be aware that the surface finish is not smooth.3M VHB Adhesive tape (already fixed to mount).Access for retaining magnetic holder retaining screw (must be fitted before fixing the mount to the frame, is not accessible once the mount is in place).Designed to fit the curvature of the Cube Stereo Hybrid top tube.Secured using 3M VHB adhesive tape (same as GoPro mounts).3D printed from PETG plastic for robustness.Original quick release magnetic fitting, with access to USB and Lanyard at base of the display.Compatible with the Bosch Kiox display and original magnetic mount.Depending on the bike, the bars may clash with the Kiox when turned past 90 degrees, this may be adjustable by changing the stem height using spaces.This may need the controller moved in toward the stem The Kiox controller will still be mounted on the bars, check before purchasing that there is enough slack in the cable to allow the bars to rotate fully and not pull the cable.Recommend that a Kiox lanyard is also installed to prevent it being lost should the adhesive fail. Mount is held on by adhesive, it can still be knocked off the frame.IMPORTANT NOTES (READ BEFORE PURCHASING): Also supplied is a stainless steel M3 bolt and nut for fitting the Bosch magnetic holder, and an alcohol wipe to prepare the frame surface for the adhesive. It comes pre-fitted with 3M VHB adhesive tape for an extra strong bond to the frame. This mount is 3D printed out of black PETG to provide extra strength. TerraTrike is owned and distributed by WhizWheelz, which earlier this month acquired Australian trike brand Greenspeed in a bid to bring trikes more into the cycling mainstream.Had enough of the handlebar mounted Bosch Kiox being exposed to knocks and damage? eBikePrints have designed a perfect mount to allow the Kiox display to be mounted just below the stem, on the top tube.įull instructions on installation can be found here for more information: Youll also need to remove the drive unit or at least drop it down to gain access to the bottom connection for the Purion into the Bosch drive unit. Before you start Youll need to secure the bike firmly so you can work on it with ease.
#Bosch purion controller full
The Boost Kit is also backwards compatible with TerraTrike’s Rover model, which sold over 15,000 units in its 10-year run. This is the full guide with videos for Removal & Installation of the Bosch eBike Purion display controls. Unlike a dedicated e-Trike or e-Bike, a Boost-equipped TerraTrike can be converted from an e-Trike back to a purely human-powered vehicle, and vice versa, will relative ease. And of course, the other reason we’re embracing this technology is because it’s gotten so good – Bosch is a brand we can trust, their product is incredible, and it’s going to eliminate a lot of barriers of entry.” “It’s scientifically proven that these Boost-equipped TerraTrikes induce uncontrollable grinning, which comes with all kinds of health benefits. “Pedal assist is the future,” said Marshall Randall, TerraTrike Director of Sales and Marketing. With an MSRP of $2,499, the Boost Kit is compatible with the Maverick, Rambler, Rover, Gran Tourismo and Traveler TerraTrike models. A Bosch PowerPack 400Wh Lithium-ion battery and Purion controller are also included, along with hardware and charger. The Boost Kit’s Bosch motor provides gentle acceleration up to 20mph, allowing riders to extend their range and overcome hilly terrain. The Boost Kit, which is compatible with most TerraTrike models, is now available through the brand’s official dealers. Michigan-based recumbent trike designer, TerraTrike, has announced a partnership with Bosch which will see the release of a power assist Boost Kit.
0 kommentar(er)
